How to clean the baby leather shoes

Hello,you would add our WhatsApp number to learn more about baby shoes :+86 13510440409.

Leather  shoes are dirty how to do? How to wash the  fur shoes? Turned fur shoes, although wearing good-looking, but have to admit that cleaning is indeed a troublesome thing, and many friends do not know how dirty flip fur dirty shoes What to do? Here's to talk to everyone about how to clean the fur shoes.

How to do when the shoes are dirty? You can use a damp cloth to scrub them first, then dry them in a cool, ventilated place after scrubbing them. How to do when the shoes are dirty? When the leather shoes look like dry and non-dry, then use bristle shoes to brush some bristles, lightly brush on the uppers, and the upper will be fluffy. Finally, use an ordinary white eraser to wipe gently on the upper, and then use a clean soft brush to wipe off the rubber swarf. No more effort is needed, and hard-to-reach stains can be removed. After continuous blow drying, the hair can be restored to its original shape.

Let's take a look at simple water-repellent techniques

Tip 1: For water-stained shoes on suede shoes, first wipe with a moist cloth, pay attention to control, then wait for the natural air-dried fur shoes, and then use 80% dry moist cloth, and wipe the remaining dry with edible oil. Water stains, and then airing for an hour or so, after the air-dried suede shoes and the same as the new.

Tip 2: Prepare a half basin of warm water, add a little neutral detergent to open it, then wipe the surface with a towel to wipe the water stain (remember that you must clean and don't want to force too much), and then use a hair dryer to dry after washing. Can (remember must not be too close to the upper)

For more stubborn water stains, you need to use a more professional cleaning method, here are two methods introduced

Stubborn water stains cleaning method Cleaning water stains Method one: Dulling powder treatment water stains

1. First, use a fur brush to brush your fur boots in one direction, and try to clean up the dirt that can be brushed off. (Disperses the binding fluff so that the shoe powder adheres more evenly to each fluff)

2, hand-held shoes, chapped powder, use the surface of the shoe powder on the water stain surface friction coating. (note the force and uniformity when using)

3, when using a tumbler, it is best to wear gloves, to avoid cleaning in the hands. Wear a mask to prevent inhalation of powder fumes

4、After spreading the hair powder evenly, use a brush to gently brush the hair again, and mess up the plush comb. At the same time, brush off the part of the shoe that is not firmly adhered. When it is finished, the fur shoes can be restored. Past color.

Cleaning water stains method II: spray dye treatment water stains

1, with a brush (can choose two sides with a rubber brush) first clean the upper, let loose fur loose open

2, spray the spray agent evenly on the surface of the frizzy shoe, pay attention to detail, even, until the water stain and the surrounding color is almost the same. 3, before the spray agent for wrinkled pelt surface to be stretched in advance

4. After the fur is to be naturally dried, apply a brush to spread the plush combing of the dye, so that the fur can be restored to color. The effect of cleaning the water stain is particularly obvious.

Note: The dyeing fluid (shoe) should be selected from the water solution, free of oily solvents. Dyeing fluid can play a role in dyeing and refurbishing!

Clean the pelt shoes with shoe powder:

1. First use the fur brush in one direction with a fur brush to remove any dirt that can be brushed off. At the same time, the direction of combing from the direction of play, so that the bond of fluff dispersed, so that shoes can be more evenly attached to each of the fluff.

2. Holding the shoe powder, use the surface of the shoe powder to rub it on the surface of the furskin. Pay attention to even and moderate force. Uneven application of force will cause different color thicknesses to produce spotted spots. Excessive force will make the thickness too large, too much floating powder will be difficult to clean up and waste. There is a shoe powder ingot is loose, squeezed and crushed, it is not easy to do slightly. It is not too hard to use too much force, fear that will make the shoe powder not stick firmly to the upper.

3. Pay attention to the use of gloves, the best, or full of dyed hands; wearing a mask is best, because there is inevitable powder dust; do not use in windy places, the wind may cause powder to fly; and, do not reach Do not say anything on the white wall, not on the table, etc.

4. After the shoe powder is applied evenly, use a brush to gently brush the hair again. This will cause messy plush combs to be straightened out, as well as brushing away some of the shoes that are not firmly adhered. If the cleaning is not clean enough at this time, you may be seriously stained pants.

The above teach you how to clean the fur shoes, how to clean the oil stains, and share several very effective cleaning methods. It tells you that the fur boots can be cleaned very clean.